Anti-Slip Orange Peel Textured Epoxy Resin Flooring System for Parking Lots
Product Overview
The SureGrip TractionGuard Orange Peel Epoxy Floor is a heavy-duty, high-traction flooring solution engineered for parking garages, vehicle service bays, truck depots, and outdoor parking lots. Combining a two-component epoxy resin (Component A: Bisphenol A-based epoxy; Component B: Polyamide curing agent) with a proprietary anti-slip aggregate blend, this system creates a durable, textured surface that mimics the rough, non-skid profile of an orange peel. Formulated to withstand tire abrasion, oil/chemical spills, UV exposure, and thermal cycling, it exceeds ADA (Americans with Disabilities Act) and OSHA slip-resistance standards while offering a visually striking, low-maintenance finish. Ideal for high-traffic commercial parking structures, logistics hubs, and municipal garages, this coating enhances safety, reduces liability, and extends floor lifespan by 300% compared to concrete or asphalt.
Key Features & Technical Advantages
- Exceptional Anti-Slip Performance
- Dynamic Coefficient of Friction (DCOF): ≥0.85 (wet/dry conditions, measured per ANSI A326.3), surpassing OSHA's 0.5 minimum for inclined surfaces.
- Pendulum Test Value (PTV): 65-75 (British Pendulum Skid Resistance Test), classified as "high slip resistance" for pedestrian and vehicle zones.
- Textured Profile Depth: 1.2-1.8 mm aggregate exposure, engineered to prevent tire hydroplaning and pedestrian slips on wet or icy surfaces.
- Chemical & Abrasion Resistance
- Automotive Fluid Tolerance: Withstands 48-hour immersion in 30% brake fluid, and 20% battery acid without etching or softening.
- Road Salt & De-Icer Resistance: Unaffected by magnesium chloride, calcium acetate, or potassium formate spills in winter maintenance zones.
- Tire Abrasion Endurance: Passes Taber Abrader CS-17 wheel test (1,000 cycles, 1 kg load) with <0.03 mm wear depth, ideal for heavy-duty truck parking.
- UV & Weather Stability
- Colorfastness: UV-stabilized pigments retain 90% of original hue after 5,000 hours QUV accelerated weathering (ASTM G154), preventing fading in outdoor lots.
- Thermal Shock Resistance: Endures 100 rapid cycles between -30°C and +80°C (per ASTM C1512) without cracking or delamination.
- Waterproof Barrier: 100% impermeable to rainwater, preventing freeze-thaw damage and rebar corrosion in subgrade concrete.
- Heavy-Traffic Durability
- Compressive Strength: 85-90 MPa (ASTM C579), exceeding concrete's 30-40 MPa to resist cracking under heavy vehicle loads.
- Flexural Strength: 45-50 MPa (ASTM C78), preventing surface crazing from thermal expansion or seismic movement.
- Impact Resistance: Withstands 5 kg steel ball drop from 2 m without cracking (custom testing for loading dock zones).
- Customizable Aesthetics & Functionality
- High-Visibility Safety Zones: Bright orange (Pantone 1655 C) or yellow (Pantone 109 C) options for fire lanes, pedestrian crossings, or EV charging stations.
- Reflective Line Marking: Optional glass bead additives for 200-300 mcd/lux/m² retroreflectivity in low-light conditions.
- Drainage Optimization: Slope-compatible formulations (0.5-2% pitch) for rapid water runoff in multi-level garages.
Technical Specifications
| Parameter |
Specification |
| Mixing Ratio |
Component A : Component B = 4:1 (weight ratio) + 15-20% anti-slip aggregate |
| Pot Life |
25-35 minutes at 25°C (mix and use within 20 minutes) |
| Recommended DFT |
2.5-3.5 mm (applied via trowel or texture spray gun) |
| Application Temperature |
5-35°C (substrate must be ≥5°C above dew point) |
| Drying Time |
Light vehicle traffic: 24-36 hours; Full cure: 7 days (25°C, 50% RH) |
| Coverage Rate |
3.0-3.5 kg/m² per 3 mm thickness (includes aggregate) |
| Shelf Life |
18 months when stored at 5-30°C in unopened, UV-protected containers |
Parking Lot Applications
- Multi-Level Garages: Prevents tire skidding on ramps and protects structural concrete from oil/chemical damage.
- Truck & Bus Depots: Withstands 20-ton axle loads, hydraulic fluid leaks, and daily power washing.
- EV Charging Stations: Non-conductive, chemical-resistant surface for battery acid spills and high-voltage safety zones.
- Airport Parking Structures: Resists jet fuel, de-icing fluids, and 24/7 traffic from passenger shuttles and cargo vehicles.
- Municipal Parking Lots: High-visibility markings for handicap spaces, loading zones, and emergency vehicle lanes.
Sustainability & Operational Benefits
- Lifecycle Cost Reduction: 15-20-year lifespan with minimal repairs, cutting maintenance costs by 70% vs. asphalt or painted concrete.
- Water Conservation: Sealed surface eliminates pothole repairs from water infiltration, reducing annual resurfacing needs.
- Energy Efficiency: Light-colored options (e.g., beige, gray) reflect 30% more sunlight than dark asphalt, lowering cooling costs.
- LEED Contributions: Qualifies for MR Credit 5 (Regional Materials) and EQ Credit 4.2 (Low-Emitting Interiors) when paired with waterborne primers.
Installation Guidelines
- Surface Preparation:
- Diamond-grind concrete to ≥CSP 4 profile; vacuum and solvent-wipe to remove oils, grease, or curing compounds.
- Repair cracks with ECC Flexible Epoxy Joint Filler (50-60 Shore D hardness).
- Apply ECC Moisture Mitigation Primer if RH exceeds 80%.
- Mixing & Application:
- Mechanically stir Component A for 3 minutes, add Component B, and mix for 2 minutes.
- Broadcast anti-slip aggregate (1-3 mm quartz/alumina blend) at 15-20% by weight while troweling or spraying.
- For ramps, use a textured spray gun (4-6 mm nozzle) to achieve consistent 1.5 mm aggregate exposure.
- Curing & Post-Treatment:
- Maintain 20-25°C and 40-60% RH for 7 days; avoid tire traffic until surface hardness reaches Shore D 70.
- Seal perimeter joints with ECC Polyurethane Caulk to prevent water ingress.
Certifications & Compliance
- OSHA 1910.22: Meets slip-resistance standards for walking/working surfaces.
- ADAAG (2010): Compliant for accessible routes (static COF ≥0.60, dynamic COF ≥0.80).
- ASTM E303: Passes British Pendulum Test for pedestrian safety in public spaces.
- NFPA 704: Non-flammable formulation (Class 1 fire rating per ASTM E84).
Conclusion
The SureGrip TractionGuard Orange Peel Epoxy Floor is the gold standard for parking facilities demanding safety, durability, and low maintenance. Its aggressive anti-slip texture, chemical resilience, and UV stability ensure compliance with global safety regulations while protecting vehicles and pedestrians from accidents. Ideal for high-traffic garages, truck depots, and outdoor lots, this coating delivers a long-lasting, high-traction surface that reduces liability, enhances aesthetics, and lowers lifecycle costs.
SPR is a rich experience in industrial building materials research and development and manufacturing enterprises, the company set product research and development, production, sales, technical service, design,plan construction as a whole, from the market itself and the actual needs of customers, special investigation, integration, implementation of integrated process operations, every step of the force.Strive for excellence, strive to provide customers with innovative system solutions and high quality products.
The company is located in Nanxiong High-tech Zone, Guangdong Province, covering an area of more than 20,000 square meters, with an annual output of 16,000 tons. In 2022, SPR and Guangdong Jianlang Hardware System Product Co., Ltd. reached a strategic cooperation in the form of equity participation, and set up a joint venture Guangdong Jianlang SPR Construction Engineering Co., LTD., to build the floor industry
Industrial chain one-stop service model.
Audited Supplier 
){kind=link}